After successfully updating ZimaCube to 1.4.1 ZimaClient fails to connect every time with “Device Connection Not Ready! Please try again later.” I use ZimaClient 2.1.0 and has been working fine on the 1.3.1 ZimaCube version.
I can manage and use the ZimaCube via browser connection so this is just an annoyance but what is the problem and how can it be resolved?
Using Windows 11 OS for this.
Have you read this guide?
And which country/region are you in? And which ISPs are you using? I mean both the cellular and wired networks.
I am not trying remote access actually. I have the client installed on my Windows 11 PC ini the same local network as the ZimaCube. I typically do not use the ZimaClient for access in that environment since I have direct access instead.
But I started seeing failures when the client starts after login on the PC. I can manually connect the ZeroTier One to the ZimaCube and that part works including using the virtual IP address to get to the Web interface.
Previously the PC was using Windows 10 and I did not reinstall the 2.1.0 client after upgrading to Windows 11. I suspect the upgrade to Windows 11 might have something to do with this failure.
Have you tried uninstalling and reinstalling it?
